Classroom address: 901 E 2nd, Suite 306, Spokane WA 99202
 

SPOKANE  CLASSES

Scroll down below instructions to see available classes

PayPal is our credit card processor. You do not need a PayPal account and can use any credit card (Grey button at checkout). The cart will open up in another window, so if you need more than one class, navigate back to this page and add another class. At the end go back to the cart and check out.

All Classes are 8hr CEU credit and are valid for Trainee CEU Credit. Details on each class is found under the CLASS OUTLINES tab. Indoor mask rules for educational settings are rescinded as of March 31, 2022. If you are displaying symptoms and have not confirmed a negative covid test, do not attend class.

  • Classroom opens at 8:00 am and class starts at 8:30am

  • Each Class must be prepaid.

  • No Walk-ins.

  • If you cannot pay via credit card, please contact us and mail a check to: INW Industrial Training
    POB 214 Newman Lake WA 99025

If you have prepaid or missed classes, contact me prior to the day of class to make arrangements.
Classes are non-refundable.  Class location will be at the Gateway 6 Bulding, Suite 306, 901 E. 2nd Ave, Spokane WA 99202.

Click address for a map. Note that the map pin is for the entrance to the complex as the access is off of Arthur Street.

   September 2022   

Monday September 26

TH5: Dimmers, Drives, Power Supplies

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Friday September 30

CF9: Hazardous Locations

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

   October 2022   

Monday October 3

Test Prep 4: Load Calculations

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am.  Note: you must have an NEC code book for this class!  

 

Friday October 7

AP1: Dwelling Unit Requirements

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Monday October 10

AP2: Pools, Pumps, Irrigation

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Friday October 14

AP3: Photovoltaic, Wind, Alternative Energy Sources

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Monday October 17

AP4: Lighting & Signs

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Friday October 21

RCW/WAC

 8 Hour CEU class for Trainee (Basic Classroom). Journey Level receive 4hrs RCW/WAC & 4hrs Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. Please bring a copy of the WAC/RCW with you. It is available for download from LNI at this link. 

Saturday October 22

2023 NEC Code Update

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. It will be a code update class. We expect to have approval for the 2023 version by this this date. 

Monday October 24

AP5 Conductors and Wiring Devices

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Monday October 31

AP6: PLCs, Drives, and Sensors

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

   November 2022   

Friday November 4

AP7: Electrical Systems & Installation Methods

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

 

Monday November 7

AP8: Overcurrent Protection, Arc Flash Reduction

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Friday November 11

AP9: NEC for HVAC

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Saturday November 12

CF1: Intro to the NEC, General Requirements

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Monday November 14

TH1: DC Theory

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Friday November 18

CF2: Wiring and Protection, NEC Ch 2

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Monday November 21

CF3: Services (Art 230)

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

   December 2022   

 

Friday December 2

TH2: AC Electrical Theory

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Monday December 5

CF4: Overcurrent & Overvoltage Protection

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Friday December 9

Test Prep for General Journey Level Exam

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. Yes, this is for trainees, and yes You Must Have an NEC Code Book! 

Saturday December 10

CF5: Grounding & Bonding

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Monday December 12

CF6: Wiring Methods

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Friday December 16

CF7: Electrical Equipment intro (NEC Ch4)

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am. 

Monday December 19

CF8: Motors, Generators, Transformers

 8 Hour CEU class for Trainee (Basic Classroom) or Journey Level (Industry Related). Cost: $125.00. Classroom opens 8:00 am and starts at 8:30am.